Permanent versus Persistent Income Shocks#
[1]:
# Initial imports and notebook setup
import matplotlib.pyplot as plt
from copy import copy
from HARK.utilities import plot_funcs
import numpy as np
[2]:
from HARK.ConsumptionSaving.ConsGenIncProcessModel import (
IndShockExplicitPermIncConsumerType,
PersistentShockConsumerType,
)
from HARK.ConsumptionSaving.ConsIndShockModel import IndShockConsumerType
First, recall that the ConsIndShockModel
assumes that income has a permanent component \(p\) which is subject to “permanent” shocks:
\(\log p_{t+1} = \log p_{t} + \log \psi_{t+1}\)
However, many papers in the literature instead examine models in which shocks merely have some persistence,
\(\log p_{t+1} = \gamma \log p_{t} + \log \psi_{t+1}\)
where if \(0 < \gamma < 1\) then \(\lim_{n \uparrow \infty} \mathbb{E}_{t}[\log p_{t+n}]=0\) (which means that the level of \(p\) reverts to its mean of \(p=1\). The two models become identical as \(\gamma\) approaches 1.
This notebook describes HARK’s tools to solve models with persistent shocks. This is acheived by the following:
Defining
ConsGenIncProcessModel
, which extendsConsIndShockModel
by explicitly tracking persistent income \(p_t\) as a state variable.Constructing the
IndShockExplicitPermIncConsumerType
, which is a type of consumer created for comparison by allowing their income process to be the one in which \(\gamma=1\) (i.e. subject to permanent shocks).
General Income Process model#
In the ConsGenIncProcessModel
, the user can define a generic function \(G\) that translates current \(p_{t}\) into expected next period persistent income \(p_{t+1}\) (subject to shocks).
The agent’s problem can be written in Bellman form as:
\begin{eqnarray*} v_t(M_t,p_t) &=& \max_{c_t} U(c_t) + \beta (1\mathsf{D}_{t+1}) \mathbb{E}_{t} [v_{t+1}(M_{t+1}, p_{t+1})] \\ a_t &=& M_t  c_t \\ a_t &\geq& \underline{a} \\ M_{t+1} &=& R a_t + \theta_{t+1} \\ p_{t+1} &=& G_{t+1}(p_t)\psi_{t+1} \\ \psi_t \sim F_{\psi_t} &\qquad& \theta_t \sim F_{\theta_t} \\ \mathbb{E} [F_{\psi_t}] = 1 & & \mathbb{E} [F_{\theta_t}] =1 \\ U(c) &=& \frac{c^{1\rho}}{1\rho} \end{eqnarray*}
The oneperiod problem for this model is solved by the function solveConsGenIncProcess
, which creates an instance of the class ConsGenIncProcessSolver
. The class GenIncProcessConsumerType
extends IndShockConsumerType
to represent agents in this model. To construct an instance of this class, several parameters must be passed to the constructor, as shown in the table below (parameters can be either “primitive” or “constructed” if they have already builtin capabilities from
previous models).
Example parameter values to solve GenIncProcess model#
Param 
Description 
Code 
Value 
Constructed 

\(\beta\) 
Intertemporal discount factor 
\(\texttt{DiscFac}\) 
0.96 

\(\rho\) 
Coefficient of relative risk aversion 
\(\texttt{CRRA}\) 
2.0 

\(R\) 
Risk free interest factor 
\(\texttt{Rfree}\) 
1.03 

\(1  \mathsf{D}\) 
Survival probability 
\(\texttt{LivPrb}\) 
[0.98] 

\(\underline{a}\) 
Artificial borrowing constraint 
\(\texttt{BoroCnstArt}\) 
0.0 

\((none)\) 
Indicator of whether \(\texttt{vFunc}\) should be computed 
\(\texttt{vFuncBool}\) 
‘True’ 

\((none)\) 
Indicator of whether \(\texttt{cFunc}\) should use cubic lines 
\(\texttt{CubicBool}\) 
‘False’ 

\(F\) 
A list containing three arrays of floats, representing a discrete approximation to the income process: event probabilities, persistent shocks, transitory shocks 
\(\texttt{IncomeDstn}\) 
\(\surd\) 

\(G\) 
Expected persistent income next period 
\(\texttt{pLvlNextFunc}\) 
\(\surd\) 

\((none)\) 
Array of timevarying persistent income levels 
\(\texttt{pLvlGrid}\) 
\(\surd\) 

\((none)\) 
Array of “extra” endofperiod asset values 
\(\texttt{aXtraGrid}\) 
\(\surd\) 
Constructed inputs to solve GenIncProcess#
The “constructed” inputs above are using expected attributes and are drawn on various methods as explained below.
The input \(\texttt{IncomeDstn}\) is created by the method
update_income_process
, which is inherited from theIndShockConsumerType
.The input \(\texttt{pLvlNextFunc}\) is created by the method
updatepLvlNextFunc
. To do so, it uses the initial sequence of \(\texttt{pLvlNextFunc}\), as well as the mean and standard deviation of the (log) initial permanent income, \(\texttt{pLvlInitMean}\) and \(\texttt{pLvlInitStd}\).Note: In this model, the method creates a trivial \(\texttt{pLvlNextFunc}\) attribute with no persistent income dynamics. But we can overwrite it by when defining other subclasses (for example, to make an AR1 income process for the newly defined agenttype).
The input \(\texttt{pLvlGrid}\) is created by the method
updatepLvlGrid
, which is done by updating the grid of persistent income levels for infinite horizon models (cycles=0) and lifecycle models (cycles=1). This method draws on the initial distribution of persistent income, the \(\texttt{pLvlNextFuncs}\), \(\texttt{pLvlInitMean}\), \(\texttt{pLvlInitStd}\) and the attribute \(\texttt{pLvlPctiles}\) (percentiles of the distribution of persistent income). It then uses a simulation approach to generate the \(\texttt{pLvlGrid}\) at each period of the cycle.The input \(\texttt{aXtraGrid}\) is created by \(\texttt{updateAssetsGrid}\), which updates the agent’s endofperiod assets grid by constructing a multiexponentially spaced grid of aXtra values, based on \(\texttt{aNrmInitMean}\) and \(\texttt{aNrmInitStd}\).
1. Consumer with Explicit Permanent Income#
Now that we’ve defined the baseline model of a consumer facing persistent income shocks, we can define an “explicit permanent income” consumer who experiences idiosyncratic shocks to permanent and transitory, and faces permanent income growth as a particular case of the general model.
The agent’s problem can be written in Bellman form as:
\begin{eqnarray*} v_t(M_t,p_t) &=& \max_{c_t} U(c_t) + \beta (1\mathsf{D}_{t+1}) \mathbb{E} [v_{t+1}(M_{t+1}, p_{t+1}) ], \\ a_t &=& M_t  c_t, \\ a_t &\geq& \underline{a}, \\ M_{t+1} &=& R/(\Gamma_{t+1} \psi_{t+1}) a_t + \theta_{t+1}, \\ p_{t+1} &=& G_{t+1}(p_t)\psi_{t+1}, \\ \psi_t \sim F_{\psi_t}, \mathbb{E} [F_{\psi_t}] = 1 &\qquad& \theta_t \sim F_{\theta_t}, \mathbb{E} [F_{\theta_t}] = 1, \\ U(c) &=& \frac{c^{1\rho}}{1\rho}. \end{eqnarray*}
Note: This agent type is identical to an
IndShockConsumerType
consumer, but now the level of permanent income \(\texttt{pLvl}\) is explicitly tracked as a state variable. This is the sense in which this model is a particular class of the GenIncProcess model, as shown in the mathematical description of the agent’s optimization problem in that model.
To construct IndShockExplicitPermIncConsumerType
as an instance of GenIncProcessConsumerType
, we need to pass additional parameters to the constructor as shown in the table below.
Additional parameters to solve ExplicitPermInc model#
Param 
Description 
Code 
Value 
Constructed 

(none) 
percentiles of the distribution of persistent income 
\(\texttt{pLvlPctiles}\) 

\(G\) 
Expected persistent income next period 
\(\texttt{pLvlNextFunc}\) 
\(\surd\) 

\(\Gamma\) 
Permanent income growth factor 
\(\texttt{PermGroFac}\) 
[1.0] 
Constructed inputs to solve ExplicitPermInc#
In this “explicit permanent income” model, we overwrite the method
updatepLvlNextFunc
to create \(\texttt{pLvlNextFunc}\) as a sequence of linear functions, indicating constant expected permanent income growth across permanent income levels. This method uses the attribute \(\texttt{PermGroFac}\), and installs a special retirement function when it exists.
[3]:
# This cell defines a dictionary to make an instance of "explicit permanent income" consumer.
GenIncDictionary = {
"CRRA": 2.0, # Coefficient of relative risk aversion
"Rfree": 1.03, # Interest factor on assets
"DiscFac": 0.96, # Intertemporal discount factor
"LivPrb": [0.98], # Survival probability
"AgentCount": 10000, # Number of agents of this type (only matters for simulation)
"aNrmInitMean": 0.0, # Mean of log initial assets (only matters for simulation)
"aNrmInitStd": 1.0, # Standard deviation of log initial assets (only for simulation)
"pLvlInitMean": 0.0, # Mean of log initial permanent income (only matters for simulation)
"pLvlInitStd": 0.0, # Standard deviation of log initial permanent income (only matters for simulation)
"PermGroFacAgg": 1.0, # Aggregate permanent income growth factor (only matters for simulation)
"T_age": None, # Age after which simulated agents are automatically killed
"T_cycle": 1, # Number of periods in the cycle for this agent type
# Parameters for constructing the "assets above minimum" grid
"aXtraMin": 0.001, # Minimum endofperiod "assets above minimum" value
"aXtraMax": 30, # Maximum endofperiod "assets above minimum" value
# Some other value of "assets above minimum" to add to the grid
"aXtraExtra": np.array([0.005, 0.01]),
"aXtraNestFac": 3, # Exponential nesting factor when constructing "assets above minimum" grid
"aXtraCount": 48, # Number of points in the grid of "assets above minimum"
# Parameters describing the income process
"PermShkCount": 7, # Number of points in discrete approximation to permanent income shocks
"TranShkCount": 7, # Number of points in discrete approximation to transitory income shocks
"PermShkStd": [0.1], # Standard deviation of log permanent income shocks
"TranShkStd": [0.1], # Standard deviation of log transitory income shocks
"UnempPrb": 0.05, # Probability of unemployment while working
"UnempPrbRet": 0.005, # Probability of "unemployment" while retired
"IncUnemp": 0.3, # Unemployment benefits replacement rate
"IncUnempRet": 0.0, # "Unemployment" benefits when retired
"tax_rate": 0.0, # Flat income tax rate
"T_retire": 0, # Period of retirement (0 > no retirement)
"BoroCnstArt": 0.0, # Artificial borrowing constraint; imposed minimum level of endof period assets
"CubicBool": False, # Use cubic spline interpolation when True, linear interpolation when False
"vFuncBool": True, # Whether to calculate the value function during solution
# More parameters specific to "Explicit Permanent income" shock model
"cycles": 0,
"pLvlPctiles": np.concatenate(
(
[0.001, 0.005, 0.01, 0.03],
np.linspace(0.05, 0.95, num=19),
[0.97, 0.99, 0.995, 0.999],
)
),
"PermGroFac": [
1.0
], # Permanent income growth factor  long run permanent income growth doesn't work yet
}
Let’s now create an instance of the type of consumer we are interested in and solve this agent’s problem with an infinite horizon (cycles=0).
[4]:
# Make and solve an example "explicit permanent income" consumer with idiosyncratic shocks
ExplicitExample = IndShockExplicitPermIncConsumerType(**GenIncDictionary)
print("Here, the lowest percentile is " + str(GenIncDictionary["pLvlPctiles"][0] * 100))
print(
"and the highest percentile is "
+ str(GenIncDictionary["pLvlPctiles"][1] * 100)
+ ".\n"
)
ExplicitExample.solve()
Here, the lowest percentile is 0.1
and the highest percentile is 99.9.
In the cell below, we generate a plot of the consumption function for explicit permanent income consumer at different income levels.
[5]:
# Plot the consumption function at various permanent income levels.
print("Consumption function by pLvl for explicit permanent income consumer:")
pLvlGrid = ExplicitExample.pLvlGrid[0]
mLvlGrid = np.linspace(0, 20, 300)
for p in pLvlGrid:
M_temp = mLvlGrid + ExplicitExample.solution[0].mLvlMin(p)
C = ExplicitExample.solution[0].cFunc(M_temp, p * np.ones_like(M_temp))
plt.plot(M_temp, C)
plt.xlim(0.0, 20.0)
plt.xlabel("Market resource level mLvl")
plt.ylabel("Consumption level cLvl")
plt.show()
Consumption function by pLvl for explicit permanent income consumer:
Permanent income normalized#
An alternative model is to normalize it by dividing all variables by permanent income \(p_t\) and solve the model again.
[6]:
# Make and solve an example of normalized model
NormalizedExample = IndShockConsumerType(**GenIncDictionary, verbose=0)
NormalizedExample.solve()
[7]:
# Compare the normalized problem with and without explicit permanent income and plot the consumption functions
print("Normalized consumption function by pLvl for explicit permanent income consumer:")
pLvlGrid = ExplicitExample.pLvlGrid[0]
mNrmGrid = np.linspace(0, 20, 300)
for p in pLvlGrid:
M_temp = mNrmGrid * p + ExplicitExample.solution[0].mLvlMin(p)
C = ExplicitExample.solution[0].cFunc(M_temp, p * np.ones_like(M_temp))
plt.plot(M_temp / p, C / p)
plt.xlim(0.0, 20.0)
plt.xlabel("Normalized market resources mNrm")
plt.ylabel("Normalized consumption cNrm")
plt.show()
print(
"Consumption function for normalized problem (without explicit permanent income):"
)
mNrmMin = NormalizedExample.solution[0].mNrmMin
plot_funcs(NormalizedExample.solution[0].cFunc, mNrmMin, mNrmMin + 20.0)
Normalized consumption function by pLvl for explicit permanent income consumer:
Consumption function for normalized problem (without explicit permanent income):
The figures above show that the normalized consumption function for the “explicit permanent income” consumer is almost identical for every permanent income level (and the same as the normalized problem’s \(\texttt{cFunc}\)), but is less accurate due to extrapolation outside the bounds of \(\texttt{pLvlGrid}\).
The “explicit permanent income” solution deviates from the solution to the normalized problem because of errors from extrapolating beyond the bounds of the \(\texttt{pLvlGrid}\). The error is largest for \(\texttt{pLvl}\) values near the upper and lower bounds, and propagates toward the center of the distribution.
[8]:
# Plot the value function at various permanent income levels
if ExplicitExample.vFuncBool:
pGrid = np.linspace(0.1, 3.0, 24)
M = np.linspace(0.001, 5, 300)
for p in pGrid:
M_temp = M + ExplicitExample.solution[0].mLvlMin(p)
C = ExplicitExample.solution[0].vFunc(M_temp, p * np.ones_like(M_temp))
plt.plot(M_temp, C)
plt.ylim([200, 0])
plt.xlabel("Market resource level mLvl")
plt.ylabel("Value v")
plt.show()
[9]:
# Simulate many periods to get to the stationary distribution
ExplicitExample.T_sim = 500
ExplicitExample.track_vars = ["mLvl", "cLvl", "pLvl"]
ExplicitExample.initialize_sim()
ExplicitExample.simulate()
plt.plot(np.mean(ExplicitExample.history["mLvl"], axis=1))
plt.xlabel("Simulated time period")
plt.ylabel("Average market resources mLvl")
plt.show()
2. Persistent income shock consumer#
Next, the PersistentShockConsumerType
class is introduced to solve consumptionsaving models with idiosyncratic shocks to income in which shocks are persistent and transitory. This model extends ConsGenIndShockModel
by allowing (log) persistent income to follow an AR(1) process.
The agent’s problem can be written in Bellman form as:
\begin{eqnarray*} v_t(M_t,p_t) &=& \max_{c_t} U(c_t) + \beta (1\mathsf{D}_{t+1}) \mathbb{E} [v_{t+1}(M_{t+1}, p_{t+1}) ], \\ a_t &=& M_t  c_t, \\ a_t &\geq& \underline{a}, \\ M_{t+1} &=& R a_t + \theta_{t+1}, \\ log(p_{t+1}) &=& \varphi log(p_t)+(1\varphi log(\overline{p}_{t+1} )) +log(\Gamma_{t+1})+log(\psi_{t+1}), \\ \\ \psi_t \sim F_{\psi_t}, \mathbb{E} [F_{\psi_t}] = 1 &\qquad& \theta_t \sim F_{\theta_t}, \mathbb{E} [F_{\theta_t}] = 1 \\ \end{eqnarray*}
Additional parameters to solve PersistentShock model#
Param 
Description 
Code 
Value 
Constructed 

\(\varphi\) 
Serial correlation coefficient for permanent income 
\(\texttt{PrstIncCorr}\) 
0.98 

Constructed inputs to solve PersistentShock#
For this model, we overwrite the method \(\texttt{updatepLvlNextFunc}\) to create the input \(\texttt{pLvlNextFunc}\) as a sequence of AR1style functions. The method uses now the attributes \(\texttt{PermGroFac}\) and \(\texttt{PrstIncCorr}\). If cycles=0, the product of \(\texttt{PermGroFac}\) across all periods must be 1.0, otherwise this method is invalid.
[10]:
# Make a dictionary for the "persistent idiosyncratic shocks" model
PrstIncCorr = 0.98 # Serial correlation coefficient for persistent income
persistent_shocks = copy(GenIncDictionary)
persistent_shocks["PrstIncCorr"] = PrstIncCorr
Again, the PersistentShockConsumerType
class solves the problem of a consumer facing idiosyncratic shocks to his persistent and transitory income, and for which the (log) persistent income follows an AR1 process rather than random walk. After modifying the dictionary from the ConsGenIncProcessModel
class to accomodate these modeling choices, we generate a particular instance of the “persistent income” consumer type below.
[11]:
# Make and solve an example of "persistent idisyncratic shocks" consumer
PersistentExample = PersistentShockConsumerType(**persistent_shocks)
PersistentExample.solve()
[12]:
# Plot the consumption function at various levels of persistent income pLvl
print(
"Consumption function by persistent income level pLvl for a consumer with AR1 coefficient of "
+ str(PersistentExample.PrstIncCorr)
+ ":"
)
pLvlGrid = PersistentExample.pLvlGrid[0]
mLvlGrid = np.linspace(0, 20, 300)
for p in pLvlGrid:
M_temp = mLvlGrid + PersistentExample.solution[0].mLvlMin(p)
C = PersistentExample.solution[0].cFunc(M_temp, p * np.ones_like(M_temp))
plt.plot(M_temp, C)
plt.xlim(0.0, 20.0)
plt.xlabel("Market resource level mLvl")
plt.ylabel("Consumption level cLvl")
plt.show()
Consumption function by persistent income level pLvl for a consumer with AR1 coefficient of 0.98:
[13]:
# Plot the value function at various persistent income levels
if PersistentExample.vFuncBool:
pGrid = PersistentExample.pLvlGrid[0]
M = np.linspace(0.001, 5, 300)
for p in pGrid:
M_temp = M + PersistentExample.solution[0].mLvlMin(p)
C = PersistentExample.solution[0].vFunc(M_temp, p * np.ones_like(M_temp))
plt.plot(M_temp, C)
plt.ylim([200, 0])
plt.xlabel("Market resource level mLvl")
plt.ylabel("Value v")
plt.show()
[14]:
# Simulate some data
PersistentExample.T_sim = 500
PersistentExample.track_vars = ["mLvl", "cLvl", "pLvl"]
PersistentExample.initialize_sim()
PersistentExample.simulate()
plt.plot(np.mean(PersistentExample.history["mLvl"], axis=1))
plt.xlabel("Simulated time period")
plt.ylabel("Average market resources mLvl")
plt.show()